fiberglass biaxial fabric is made by aligning untwisted rovings in 0°/90° directions and then stitching them together with sewing threads. It can be chosen with or without a mat layer depending on the application. It is mainly used for reinforcing unsaturated polyester resin, vinyl resin, and epoxy resin, with typical products including wind blades, hulls, containers, sports equipment, automotive parts, etc.  Product List   Code Weight （ g/m² ）     +45°       (g/m 2 )       -45°     (g/m 2 ) Chop strands （ g/m²） EBX450 450 225 225 - EBX600 600 300 300 - EBXM600/225 825 300 300 225 EBXM600/300 900 300 300 300 EBXM600/450 1050 300 300 450 EBX800 800 400 400 - EBXM800/225 1025 400 400 225 EBXM800/300 1100 400 400 300 EBXM800/450 1250 400 400 450     Remarks: Roll width:   Standard width in 1250mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to2600mm. Packing:   Fiberglass double biaxial fabric is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container. Storage:   The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15 ℃   to 35 ℃   and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.

{1}

{2}

{68}

{69}

{70}

{71}{72}

{73}

{74}

{75}{76}

{77}{78}

{79}{80}{81}{82}{83}{84}{85}