Fiberglass stitched mat is made of chopped fiberglass strands in a certain length, then freely put and stitched together with polyester tissue or carbon fiber tissue by polyester yarn. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in pultrusion pipes and tanks, FRP boat, insulation panels, anode tubes, auto parts, bath tubes etc, suitable for pultrusion, filament winding, RTM, hand lay-up processes.   Product List   Code Weight   (g/m 2 ) Chopped strand     (g/m 2 ) Polyester tissue     (g/m2) Carbon tissue    (g/m 2 )   Moisture     Content Wet speed (≤S) EMK200 200 200 - - ≤0.2 ≤60 EMK250 250 250 - - ≤0.2 ≤60 EMK300 300 300 - - ≤0.2 ≤60 EMK380 380 380 - - ≤0.2 ≤60 EMK400 400 400 - - ≤0.2 ≤60 EMK450 450 450 - - ≤0.2 ≤60 EMK600 600 600 - - ≤0.2 ≤60   EMK300/C20 320 300 - 20 ≤0.2 ≤60 EMK300/C30 330 300   30 ≤0.2 ≤60 EMK380/C20 400 380   20 ≤0.2 ≤60 EMK300/N45 345 300 45 - ≤0.2 ≤60 EMK380/N45 425 380 45 - ≤0.2 ≤60 EMK450/N45 495 450 45 - ≤0.2 ≤60   Remarks: Roll width:   Standard width in 1200mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to 3200mm. Packing:   Fiberglass stitched mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container. Storage:   The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15 ℃   to 35 ℃   and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.  {1}

{2}

{3}

{121}

{122}

{123}

{124}{125}

{126}{127}

{128}

{129}{130}

{131}{132}{133}{134}{135}{136}{137}

{138}